Tag: Windows 8

Updating WSUS to work with Windows 8 and Server 2012

I have to confess that I haven’t been paying as much attention to WSUS as I should have and even though I had been going in and approving updates as they have become available I failed to notice that my Windows 8 clients and the Windows Server 2012 were being misidentified and hadn’t yet reported to WSUS.


Windows 8 was being identified as Windows XP Professional x64 Edition and Windows Server 2012 as Windows Server 2003 Standard x64 Edition.

With a little help from http://chapsnet.wordpress.com/ I was able to resolve the issues through the following steps.

First I visited Microsoft to download the Update for WSUS 3.0 SP2 (KB2734608) that allows it to be able to recognise Windows 8 and Windows Server 2012 Operating Systems and download the appropriate updates.

Once installed on the WSUS Server there are a couple of services that need to be reset in order for it to then synchronize correctly and recognise the newer operating systems.

open Command Prompt and run the following commands
net stop WSUSService
net start WSUSService

Open the Console, Update the Product List and begin a Synchronisation

Even though my clients had already been connected to the WSUS server prior to the update I only needed to do the following on the Windows Server 2012 machine in order for it to update in the WSUS console. The Windows 8 clients re-identified themselves correctly without anything further needing to be done.

Open an elevated Command Prompt (Win + X menu)
enter the following commands
net stop wuauserv
rd /s %windir%\softwaredistribution\
net start wuauserv
wuauclt /update

Running wuauclt /ResetAuthorization /DetectNow at the command prompt on the Windows 2012 server resolved the reporting issue and S300-Win2012 now shows up as both being identiifed as Windows Server 2012 and as having reported in. It looks like there are 3 updates that it requires.


Using Clonezilla with Windows 8

To reduce the workload with setting up the new Dell Vostro 470 PCs that were purchased I decided to build one and then clone it to the other seven using Clonezilla. I chose Clonezilla because I had plenty of experience with it and 8 PCs was too many to build one by one but not enough to make it worthwhile to the Microsoft Deployment Toolkit (MDT).

The build process involved setting up the PC, deleting all the cruft that came with the PC that we didn’t require and then installing all the standard software that we had volume licences for, not Microsoft Office 2013 unfortunately as we purchased the Home and Business version without a volume license (this meant I had to register 35 licences myself to a new Microsoft account in the name of Activus IT Support).

Once the PC was built in order to clone it to the others I needed to create an image and this meant booting from the Clonezilla CD, and the CD drive as is typical is not the primary device in the boot process. In previous versions of Windows this was a trivially easy task to change as it just required hitting F2 or Esc as the computer booted to access the BIOS and then change the appropriate settings on the boot screen.

Windows 8 however is a more complicated beast in this respect and accessing the ‘BIOS’ isn’t as simple as hitting a key as the PC boots.

Instead you need to boot all the way into Windows and then instruct it to change it’s behaviour the next time it boots so you can access the UEFI settings. Firstly from the Settings menu select Advanced startup.


Would be tempting to choose the option Use a device here and then boot from the Clonezilla CD, however it will fail to boot because of the Secure Boot feature. This feature is designed to prevent the loading of drivers or OS loaders that are not signed with an acceptable digital signature and Clonezilla lacks that digital signature.


Choose Troubleshoot and then UEFI Firmware Settings from the Advanced options screen.


Having accessed the UEFI remember that it isn’t just a case of changing the primary boot device to the CD-ROM drive you must also turn off Secure Boot.

Having done all that I was finally able to create the image from the disk.

Reboot and you’ll be greeted with the following message as Windows 8 requires UEFI and Secure Boot to be enabled again.

Reboot and Select proper Boot device
or Insert Boot Media in selected Boot device and press a key

Instead you need to hit F2 to enter setup and change the boot settings back to how they were. Change the Boot Mode back to UEFI and then Enable Secure Boot again.

Save and Exit and Windows 8 will then boot correctly.

As an aside I just discovered I can launch the command prompt from the start screen just by typing cmd (a lot easier than navigating to it using a mouse in the Windows 8 interface).

Don’t even need to launch the Run dialog box to run basic commands such as ping!

Windows Blue is Microsoft’s future low-cost OS with yearly updates


Windows 8 launching late October

Windows 8 launching late October, RTM ‘on track’ for August | The Verge http://www.theverge.com/2012/7/9/3146476/windows-8-will-rtm-august-release-late-october via @verge

Paul Thurrott recommends viewing the BUILD 2011 keynote given by Steven Sinofsky in which Windows 8 was finally unveiled to understand the roadmap of the development and release of what is the most significant OS from Microsoft since Windows 95.

Buy a Windows 7 PC now and get Windows 8 for $15

PC sales generally slow down in the months running up to the launch of a new version of Windows as potential purchasers wait until the launch. In order to mitigate this Microsoft have a special offer to allow upgrading to Windows 8 for only $15 if you buy a Windows 7 machine now.

What’s Plan B should Windows 8 fail?

Windows 8 Failure Could Set Off Tech Industry Chain Reaction

What’s plan b?

Plan b should be an Office Everywhere initiative